Standards Catalog
Our Standards Catalog serves as a centralized hub, offering a searchable list of standards documents that cover a wide range of topics. Whether you're delving into cable telecommunications, broadband, video, energy, or other cutting-edge technologies, this page provides easy access to the industry's latest standards.
Purchase SCTE and Other Related Standards
Paper copies of SCTE standards as well as subscriptions and related materials are available from IHS, Techstreet and the ANSI Standards Store.
Standards
|
Number
|
Title
|
|---|---|
| ANSI/SCTE 01 2021 | Specification for "F" Port, Female, Outdoor |
| ANSI/SCTE 02 2021 | Specification for "F" Port, Female, Indoor |
| ANSI/SCTE 03 2022 | Test Method for Coaxial Cable Structural Return Loss |
| ANSI/SCTE 04 2021 | Test Method for "F" Connector Return Loss |
| ANSI/SCTE 05 2022 | Test Method for "F" Connector Return Loss In-Line Pair |
| ANSI/SCTE 06 2019 | Composite Distortion Measurements (CSO & CTB) |
| ANSI/SCTE 07 2018 (R2024) | Digital Transmission Standard For Cable Television |
| ANSI/SCTE 09 2016 | Test Method for Cold Bend |
| ANSI/SCTE 10 2014 (R2021) | Test Method for Flexible Coaxial Cable Impact |
| ANSI/SCTE 11 2018 | Test Method for Aerial Cable Corrosion Protection Flow |
| SCTE 12 2018 (R2024) | Test Method for Coaxial Hardline Distribution Cables |
| SCTE 13 2018 (R2024) | Dielectric Air Leakage Test Method for Coaxial Hardline Distribution Cables |
| ANSI/SCTE 14 2016 (R2022) | Test Method for Hex Crimp Tool Verification/Calibration |
| ANSI/SCTE 15 2022 | Specification for Trunk, Feeder and Distribution Coaxial Cable |
| ANSI/SCTE 16 2018 (R2024) | Test Procedure for Hum Modulation |
| SCTE 17 2018 (R2024) | Test Procedure for Carrier to Noise (C/N, CCN, CIN, CTN) |
| ANSI/SCTE 18 2018 (ANSI J-STD-42-C) | Emergency Alert Messaging for Cable |
| ANSI/SCTE 19 2018 (R2024) | Methods for Isochronous Data Services Transport |
| ANSI/SCTE 20 2017 (R2022) | Method for Carriage of Closed Captions and Non-Real Time Sampled Video |
| ANSI/SCTE 21 2017 (R2022) | Standard For Carriage Of VBI Data In Cable Digital Transport Streams |
| ANSI/SCTE 23-1 2017 (R2022) | DOCSIS 1.1 Part 1: Radio Frequency Interface |
| ANSI/SCTE 23-2 2017 (R2022) | DOCSIS 1.1 Part 2: Baseline Privacy Plus Interface |
| ANSI/SCTE 23-3 2017 (R2022) | DOCSIS 1.1 Part 3: Operations Support System Interface |
| ANSI/SCTE 24-1 2016 (R2022) | IPCablecom 1.0 Part 1: Architecture Framework for the Delivery of Time-Critical Services over Cable Television Networks Using Cable Modems |
| ANSI/SCTE 24-2 2016 (R2022) | IPCablecom 1.0 Part 2: Audio Codec Requirements for the Provision of Bi-directional Audio Service Over Cable Television Networks Using Cable Modems |
| ANSI/SCTE 24-3 2016 (R2022) | IPCablecom 1.0 Part 3: Network Call Signaling Protocol for the Delivery of Time-Critical Services over Cable Television Using Data Modems |
| ANSI/SCTE 24-4 2016 (R2022) | IPCablecom 1.0 Part 4: Dynamic Quality of Service for the Provision of Real-Time Services over Cable Television Networks Using Data Modems |
| ANSI/SCTE 24-5 2016 (R2022) | IPCablecom 1.0 Part 5: Media Terminal Adapter (MTA) Device Provisioning Requirements for the Delivery of Real-Time Services over Cable Television Using Cable Modems |
| ANSI/SCTE 24-6 2016 (R2022) | IPCablecom 1.0 Part 6: IPCablecom Management Information Base (MIB) Framework |
| ANSI/SCTE 24-7 2016 (R2022) | IPCablecom 1.0 Part 7: Media Terminal Adapter (MTA) Management Information Base (MIB) Requirements |
| ANSI/SCTE 24-8 2016 (R2022) | IPCablecom 1.0 Part 8: Signaling Management Information Base (MIB) Requirements |
| ANSI/SCTE 24-9 2016 (R2022) | IPCablecom 1.0 Part 9: Event Message Requirements |
| ANSI/SCTE 24-10 2016 (R2022) | IPCablecom 1.0 Part 10: Security Specification |
| ANSI/SCTE 24-11 2016 (R2022) | IPCablecom 1.0 Part 11: Internet Signaling Transport Protocol (ISTP) |
| ANSI/SCTE 24-12 2016 (R2022) | IPCablecom 1.0 Part 12: Trunking Gateway Control Protocol (TGCP) |
| ANSI/SCTE 24-21 2017 (R2022) | BV16 Speech Codec Specification for Voice over IP Applications in Cable Telephony; get the source code here |
| ANSI/SCTE 24-22 2018 (R2023) | iLBCv2.0 Speech Codec Specification for Voice over IP Applications in Cable Telephony |
| ANSI/SCTE 24-23 2017 (R2023) | BV32 Speech Codec Specification for Voice over IP Applications in Cable Telephony |
| ANSI/SCTE 25-1 2017 (R2022) | Hybrid Fiber Coax Outside Plant Status Monitoring – Physical (PHY) Layer Specification v1 |
| ANSI/SCTE 25-2 2017 (R2022) | Hybrid Fiber Coax Outside Plant Status Monitoring – Media Access Control (MAC) Layer Specification v1.0 |
| ANSI/SCTE 25-3 2017 (R2022) | Hybrid Fiber Coax Outside Plant Status Monitoring – Power Supply to Transponder Interface Bus (PSTIB) Specification v1.1 |
| ANSI/SCTE 26 2017 (R2021) | Home Digital Network Interface Specification with Copy Protection |
| ANSI/SCTE 27 2016 (R2021) | Subtitling Methods for Broadcast Cable |
| ANSI/SCTE 28 2017 (R2022) | Host-POD Interface Standard |
| ANSI/SCTE 29 2018 (R2024) | Torque Requirements for Bond Wire Penetration of Bonding Set Screw |
| ANSI/SCTE 30 2021 | Digital Program Insertion Splicing API |
| ANSI/SCTE 31 2016 | Test Method for Measuring Diameter Over Core |
| ANSI/SCTE 32 2016 (R2021) | Ampacity of Coaxial Telecommunications Cables |
| ANSI/SCTE 33 2016 | Test Method for Diameter of Drop Cable |
| ANSI/SCTE 34 2016 (R2021) | Test Method for Cored Depth Verification |
| ANSI/SCTE 35 2023r1 | Digital Program Insertion Cueing Message |
| SCTE 36 2018 (R2024) | SCTE-ROOT Management Information Base (MIB) Definitions |
| ANSI/SCTE 37 2017 (R2021) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOTS Management Information Base (MIB) Definition |
| ANSI/SCTE 38-1 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-PROPERTY-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-2 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-3 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-4 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB) Definition |
| SCTE 38-5 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-6 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring – SCTE-HMS-GEN-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-7 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder-Interface-Bus(TIB)-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-8 2017 (R2022) | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-10 2017 (R2022) | Outside Plant Status Monitoring SCTE-HMS-RF-AMPLIFIER-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-11 2017 (R2022) | HMS Headend Management Information Base (MIB) SCTE-HMS-HEADENDIDENT-MIB |
| ANSI/SCTE 39 2013 (R2021) | Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables |
| ANSI/SCTE 40 2016 (R2021) | Digital Cable Network Interface Standard |
| ANSI/SCTE 41 2016 (R2021) | POD Copy Protection System |
| ANSI/SCTE 42 2019 (R2024) | IP Multicast for Digital MPEG Networks |
| ANSI/SCTE 43 2015 (R2021) | Digital Video Systems Characteristics Standard for Cable Television |
| ANSI/SCTE 44 2018 (R2024) | Test Method for DC Loop Resistance |
| ANSI/SCTE 45 2022 | Test Method for Group Delay |
| ANSI/SCTE 46 2014 (R2021) | Test Method for AC to DC Power Supplies |
| ANSI/SCTE 47 2022 | Test Method for Coaxial Cable Attenuation |
| ANSI/SCTE 48-1 2021 | Test Method for Measuring Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell |
| ANSI/SCTE 48-3 2021 | Test Procedure for Measuring Shielding Effectiveness of Coaxial Cable and Connectors Using the GTEM Cell |
| ANSI/SCTE 49 2011 (R2021) | Test Method for Velocity of Propagation |
| ANSI/SCTE 51 2018 (R2024) | Method for Determining Drop Cable Braid Coverage |
| ANSI/SCTE 52 2018 (2024) | Data Encryption Standard - Cipher Block Chaining Packet Encryption Specification |
| ANSI/SCTE 53 2019 (R2024) | Methods for Asynchronous Data Services Transport |
| ANSI/SCTE 54 2024 | Digital Video Service Multiplex and Transport System Standard for Cable Television |
| ANSI/SCTE 55-1 2019 (R2024) | Digital Broadband Delivery System: Out of Band Transport Part 1: Mode A |
| ANSI/SCTE 55-2 2019 (R2024) | Digital Broadband Delivery System: Out of Band Transport Part 2: Mode B |
| ANSI/SCTE 56 2016 (R2021) | Digital Multiprogram Distribution by Satellite |
| ANSI/SCTE 57 2016 (R2021) | System Information for Satellite Distribution of Digital Television for Cable and MMDS |
| ANSI/SCTE 58 2017 (R2022) | AM Cross Modulation Measurements |
| ANSI/SCTE 59 2018 (R2024) | Test Method for Drop Cable Center Conductor Bond to Dielectric |
| ANSI/SCTE 60 2015 (R2021) | Test Method for Interface Moisture Migration Double Ended |
| ANSI/SCTE 61 2018 (R2024) | Test Method for Jacket Web Separation |
| ANSI/SCTE 62 2018 | Measurement Procedure for Noise Figure |
| ANSI/SCTE 63 2021 | Test Method for Voltage / Spark Test of Outer Jacket |
| ANSI/SCTE 65 2016 (R2021) | Service Information Delivered Out-of-Band for Digital Cable Television |
| ANSI/SCTE 66 2022 | Test Method For Coaxial Cable Impedance |
| ANSI/SCTE 67 2024 | Recommended Practice for Digital Program Insertion for Cable |
| ANSI/SCTE 69 2007 | Test Method for Moisture Inhibitor Corrosion Resistance |
| SCTE 71 2024 | Specification for Series 15, Braided, 75 Ω, Coaxial, Multi-Purpose Cable |
| ANSI/SCTE 73 2018 | Test Method for Insertion Force of Connector to Drop Cable Interface |
| SCTE 74 2023 | Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable |
| ANSI/SCTE 75 2012 | Test Point Accuracy |
| ANSI/SCTE 77 2023 | Specification for Underground Enclosure Integrity |
| ANSI/SCTE 78 2021 | Test Method for Transfer Impedance |
| ANSI/SCTE 79-1 2016 (R2021) | DOCSIS 2.0 Part 1: Radio Frequency Interface |
| ANSI/SCTE 79-2 2021 (R2021) | DOCSIS 2.0 Part 2: Operations Support System Interface |
| ANSI/SCTE 79-3 2017 (R2021) | DOCSIS 2.0 + IPv6 Cable Modem Standard |
| ANSI/SCTE 81 2018 | Surge Withstand Test Procedure |
| ANSI/SCTE 82 2012 (R2022) | Test Method for Low Frequency and Spurious Disturbances |
| SCTE 83-1 2017 (R2024) | HMS Inside Plant Management Information Base (MIB) Part 1: SCTE-HMS-HE-OPTICS-MIB |
| SCTE 83-3 2017 (R2024) | Hybrid Fiber/Coax Inside Plant Status Monitoring SCTE-HMS-HMTS-MIB Management Information Base (MIB) Definition |
| SCTE 83-4 2017 (R2024) | HMS Common Inside Plant Management Information Base (MIB) SCTE-HMS-HE-RF-MIB |
| ANSI/SCTE 84-1 2017 (R2022) | HMS Common Inside Plant Management Information Base (MIB) Part 1: SCTE-HMS-HE-COMMON-MIB |
| ANSI/SCTE 84-2 2017 (R2022) | HMS Inside Plant Management Information Base (MIB) SCTE-HMS-HE-POWER-SUPPLY-MIB |
| ANSI/SCTE 84-3 2017 (R2022) | HMS Inside Plant Management Information Base (MIB) SCTE-HMS-HE-FAN-MIB |
| ANSI/SCTE 85-1 2017 (R2022) | HMS HE Optics Management Information Base (MIB) Part 1: SCTE-HMS-HE-OPTICAL TRANSMITTER-MIB |
| ANSI/SCTE 85-2 2017 (R2022) | HMS HE Optics Management Information Base (MIB) Part 2: SCTE-HMS-HE-OPTICAL-RECEIVER-MIB |
| ANSI/SCTE 85-3 2017 (R2022) | HMS Inside Plant Management Information Base SCTE-HMS-HE-OPTICAL-AMPLIFIER-MIB |
| ANSI/SCTE 85-4 2017 (R2022) | HMS Common Inside Plant Management Information Base SCTE-HMS-HE-OPTICAL-SWITCH-MIB |
| ANSI/SCTE 86 2021 | SCTE Recommended Optical Fiber Cable Types for Outside Plant Trunk and Distribution Applications |
| ANSI/SCTE 87 2017 | Graphic Symbols for Cable Systems |
| ANSI/SCTE 88 2012 (R2021) | Test Methods for Polyethylene Jacket Longitudinal Shrinkage |
| ANSI/SCTE 91 2022 | Specification for 5/8-24 RF & AC Equipment Port, Female |
| ANSI/SCTE 92 2022 | Specification for 5/8-24 Plug, (Male), Trunk and Distribution Connectors |
| ANSI/SCTE 93 2020 | Test Method For Connector/Cable Twist |
| ANSI/SCTE 94-1 2017 (R2022) | HMS Common Inside Plant Management Information Base SCTE-HMS-HE-RF-AMP-MIB |
| ANSI/SCTE 94-2 2017 (R2022) | HMS Common Inside Plant Management Information Base SCTE-HMS-HE-RF-SWITCH-MIB |
| SCTE 95 2018 (R2024) | HMS Inside Plant HMTS Theory of Operation |
| ANSI/SCTE 96 2020 | Cable Telecommunications Testing Guidelines |
| ANSI/SCTE 98 2020 | Test Method for Withstand Tightening Torque - 'F' Male |
| ANSI/SCTE 99 2019 | Test Method for Axial Pull Connector/Drop Cable |
| ANSI/SCTE 101 2019 | Hard Line Splice Connector Return Loss |
| ANSI/SCTE 102 2016 | Cable Retention Force Testing of Trunk & Distribution Connectors |
| ANSI/SCTE 103 2018 | Test Method for DC Contact Resistance, Drop cable to "F" connectors and F 81 Barrels |
| ANSI/SCTE 104 2023 | Automation System to Compression System Communications Applications Program Interface (API) |
| SCTE 106 2018 (R2024) | DOCSIS® Set-Top Gateway (DSG) Specification |
| ANSI/SCTE 107 2021 | Embedded Cable Modem Devices |
| ANSI/SCTE 108 2018 | Test Method for Dielectric Withstand of Coaxial Cable |
| SCTE 109 2024 | Test Procedure for Common Path Distortion (CPD) |
| ANSI/SCTE 110 2020 | Hybrid Fiber Coax Outside Plant Status Monitoring: Alternative Power Supply to Transponder Interface Bus (PSTIB) For HMS Transponders |
| ANSI/SCTE 111 2017 | Specification for 5/8-24 Plug, Male Adapters |
| ANSI/SCTE 112 2017 (R2022) | HMS / DOCSIS® Transponder for Outside Plant Power Supply |
| ANSI/SCTE 113 2017 (R2022) | HMS Digital Transport Management Information Base SCTE-HMS-HE-DIG-TRANSPORT-MIB |
| ANSI/SCTE 115 2019 | Test Method for Reverse Path (Upstream) Intermodulation Using Two Carriers |
| ANSI/SCTE 116 2018 | Specification for 5/8-24 Port, Female Adapters |
| ANSI/SCTE 118-1 2019 (R2024) | Program-Specific Ad Insertion - Data Field Definitions, Functional Overview and Application Guidelines |
| ANSI/SCTE 118-2 2019 (R2024) | Program-Specific Ad Insertion - Content Provider to Traffic Communication Applications Data Model |
| ANSI/SCTE 118-3 2019 (R2024) | Program-Specific Ad Insertion - Traffic System to Ad Insertion System File Format Specification |
| ANSI/SCTE 119 2018 | Measurement Procedure for Noise Power Ratio |
| SCTE 121 2018 (R2024) | Test Method for Downstream Bit Error Ratio |
| ANSI/SCTE 123 2021 | Specification for "F" Connector, Male, Feed-Through |
| ANSI/SCTE 124 2021 | Specification for "F" Connector, Male, Pin Type |
| ANSI/SCTE 125 2020 | Hard Line Pin Connector Return Loss |
| ANSI/SCTE 126 2019 | Test Method for Distortion of 2-way Amplifiers Caused by Insufficient Isolation of Built in Diplex Filter |
| ANSI/SCTE 127 2019 (R2024) | Carriage of Vertical Blanking Interval (VBI) Data in North American Digital Television Bitstreams |
| ANSI/SCTE 128-1 2020 | AVC Video Constraints for Cable Television Part 1: Coding |
| ANSI/SCTE 128-2 2024 | AVC Video Constraints for Cable Television Part 2: Transport |
| ANSI/SCTE 129 2021 | Drop Passives: Bonding Blocks (Without Surge Protection) |
| ANSI/SCTE 130-1 2020 | Digital Program Insertion – Advertising Systems Interfaces Part 1: Advertising Systems Overview |
| ANSI/SCTE 130-2 2020 | Digital Program Insertion - Advertising Systems Interfaces Part 2: Core Messaging and Data Types |
| ANSI/SCTE 130-3 2020 | Digital Program Insertion - Advertising Systems Interfaces Part 3: Ad Management Service (AM) and Ad Decision Service (ADS) |
| ANSI/SCTE 130-4 2020 | Digital Program Insertion–Advertising Systems Interfaces Part 4 Content Information Service (CIS) |
| ANSI/SCTE 130-5 2020 | Digital Program Insertion-Advertising Systems Interfaces Part 5-Placement Opportunity Information Service |
| ANSI_SCTE 130-6 2020 | Digital Program Insertion–Advertising Systems Interfaces Part 6–Subscriber Information Service (SIS) |
| ANSI/SCTE 130-7 2020 | Digital Program Insertion–Advertising Systems Interfaces Part 7 – Message Transport |
| ANSI/SCTE 130-8 2020 | Digital Program Insertion-Advertising Systems Interfaces Part 8-General Information Service (GIS) |
| ANSI/SCTE 130-9 2020 | Recommended Practices for SCTE 130 Digital Program Insertion—Advertising Systems Interfaces |
| ANSI/SCTE 130-10 2020 | Digital Program Insertion – Advertising Systems Interfaces Part 10: Stream Restriction Data Model (SRDM) |
| SCTE 131 2017 (R2024) | HMS VoIP Test Management Information Base (MIB) Definition SCTE-HMS-VOIP-MIB |
| ANSI/SCTE 132 2019 | Test Method For Reverse Path (Upstream) Bit Error Rate |
| ANSI/SCTE 133 2017 (R2021) | Downstream RF Interface for Cable Modem Termination Systems |
| SCTE 134 2021 | Fusion Splicing Equipment and Applications for the Cable/Broadband Industry |
| SCTE 135-1 2018 (R2024) | DOCSIS 3.0 Part 1: Physical Layer Specification |
| SCTE 135-02 2019 (R2024) | DOCSIS 3.0 Part 2: MAC and Upper Layer Protocols |
| ANSI/SCTE 135-03 2023 | DOCSIS 3.0 Part 3: Security Services |
| SCTE 135-4 2019 (R2024) | DOCSIS 3.0 Part 4: Operations Support System Interface |
| ANSI/SCTE 135-5-2022 | DOCSIS 3.0 Part 5: Cable Modem to Customer Premise Equipment Interface |
| ANSI/SCTE 136-1 2019 | Layer 2 Virtual Private Networks for IP Cable Modem Systems |
| ANSI/SCTE 136-2 2019 | Cable Modem TDM Emulation Interface Standard |
| ANSI/SCTE 137-1 2017 (R2021) | Modular Headend Architecture Part 1: DOCSIS Timing Interface |
| ANSI/SCTE 137-2 2017 (R2021) | Modular Head End Architecture Part 2: M-CMTS Downstream External PHY Interface |
| ANSI/SCTE 137-3 2017 (R2021) | Modular Headend Architecture Part 3: M-CMTS Operations Support System Interface |
| ANSI/SCTE 137-4 2017 (2021) | Edge Resource Manager Interface for Modular Cable Modem Termination Systems |
| ANSI/SCTE 137-5 2017 (R2021) | Modular Headend Architecture Part 5: Edge QAM Provisioning and Management Interface |
| ANSI/SCTE 137-6 2017 (R2021) | Modular Headend Architecture Part 6: Edge QAM Video Stream Interface |
| ANSI/SCTE 137-7 2017 (R2021) | Modular Headend Architecture Part 7: EQAM Architectural Overview Technical Report |
| ANSI/SCTE 138 2019 (R2024) | Stream Conditioning for Switching of Addressable Content in Digital Television Receivers |
| ANSI/SCTE 140 2019 | Cable Modem IPv4 and IPv6 eRouter Specification |
| ANSI/SCTE 142 2017 (R2021) | Recommended Practice for Transport Stream Verification |
| SCTE 143 2018 (2024) | Test Method for Salt Spray |
| ANSI/SCTE 144 2023 | Test Procedure for Measuring Transmission and Reflection |
| ANSI/SCTE 145 2022 | Test Method for Second Harmonic Distortion of Passives Using a Single Carrier |
| ANSI/SCTE 146 2021 | Outdoor "F" Female to "F" Female Inline Splice |
| ANSI/SCTE 147 2022 | Specification for 75 ohm, Inline Attenuators |
| ANSI/SCTE 148 2022 | Specification for Male "F" Terminator, 75 Ohm |
| ANSI/SCTE 149 2019 | Test Method for Withstanding Tightening Torque- "F" Female |
| ANSI/SCTE 150 2013 | Preparing a Line Extender Specification |
| ANSI/SCTE 151 2021 | Mechanical, Electrical, and Environmental Requirements for RF Traps and Filters |
| ANSI/SCTE 152 2019 | Test Procedure for Contact Resistance Measurement of Mainline Plug Interface |
| ANSI/SCTE 153 2021 | Drop Passives: Splitters, Couplers and Power Inserters |
| SCTE 154-1 2018 (R2024) | Digital Video Common MIB |
| SCTE 154-2 2018 (R2024) | SCTE-HMS-QAM-MIB |
| SCTE 154-3 2018 (R2024) | Encoder MIB |
| SCTE 154-4 2018 (R2024) | MPEG Management Information Base SCTE-HMS-MPEG MIB |
| SCTE 154-5 2018 (R2024) | SCTE-HMS-HEADENDIDENT TEXTUAL CONVENTIONS MIB |
| ANSI/SCTE 155 2021 | Indoor "F" Female to "F" Female Inline Splice |
| ANSI/SCTE 156 2023 | Specification for Mainline Plug (Male) to Cable Interface |
| ANSI/SCTE 158 2016 | Recommended Environmental Condition Ranges for Broadband Communications Equipment |
| ANSI/SCTE 159-1 2017 (R2021) | Multimedia Application and Service Part 1: IPCablecom Multimedia |
| ANSI/SCTE 159-2 2017 (R2021) | Multimedia Application and Service Part 2: IPCablecom Multimedia Web Services |
| ANSI/SCTE 160 2023 | Specification for Mini ‘F’ Connector, Male, Pin Type |
| ANSI/SCTE 161 2022 | Drop Amplifiers |
| ANSI/SCTE 162 2019 | Emergency Alert Signaling for the Home Network |
| SCTE 163 2018 (R2024) | SCTE HMS Switched Digital Video MIB |
| ANSI/SCTE 164 2019 | Emergency Alert Metadata Descriptor |
| SCTE 165-01 2019 (R2024) | IPCablecom 1.5 Part 1: Architecture Framework Technical Report |
| ANSI/SCTE 165-2 2016 (R2021) | IPCablecom 1.5 Part 2: Audio/Video Codecs |
| ANSI/SCTE 165-3 2016 (R2021) | IPCablecom 1.5 Part 3: Network-Based Call Signaling Protocol |
| SCTE 165-04 2019 (R2024) | IPCablecom 1.5 Part 4: Dynamic Quality-of-Service |
| SCTE 165-05 2019 (R2024) | IPCablecom 1.5 Part 5: Media Terminal Adapter (MTA) Device Provisioning |
| SCTE 165-06 2019 (R2024) | IPCablecom 1.5 Part 6: MIBS Framework |
| SCTE 165-07 2019 (R2024) | IPCablecom 1.5 Part 7: MTA MIB |
| SCTE 165-08 2019 (R2024) | IPCablecom 1.5 Part 8: Signaling MIB |
| SCTE 165-09 2019 (R2024) | IPCablecom 1.5 Part 9: Event Messaging |
| ANSI/SCTE 165-10 2020 | IPCablecom 1.5 Part 10: Security |
| SCTE 165-11 2019 (R2024) | IPCablecom 1.5 Part 11: Analog Trunking for PBX Specification |
| ANSI/SCTE 165-12 2016 (R2021) | IPCablecom 1.5 Part 12: PSTN Gateway Call Signaling Protocol |
| SCTE 165-13 2019 (R2024) | IPCablecom 1.5 Part 13: Electronic Surveillance Standard |
| SCTE 165-14 2019 (R2024) | IPCablecom 1.5 Part 14: Embedded MTA Analog Interface and Powering |
| SCTE 165-15 2019 (R2024) | IPCablecom 1.5 Part 15: Management Event MIB Specification |
| ANSI/SCTE 165-16 2022 | IPCablecom 1.5 Part 16: Management Event Mechanism |
| SCTE 165-17 2019 (R2024) | IPCablecom 1.5 Part 17: Audio Server Protocol |
| ANSI/SCTE 165-18 2016 (R2021) | IPCablecom 1.5 Part 18: CMS to CMS Signaling |
| SCTE 165-19 2019 (R2024) | IPCablecom 1.5 Part 19: CMS Subscriber Provisioning Specification |
| SCTE 165-20 2019 (R2024) | IPCablecom 1.5 Part 20: MTA Extension MIB |
| ANSI/SCTE 165-21 2016 (R2021) | IPCablecom 1.5 Part 21: Signaling Extension MIB |
| ANSI/SCTE 166 2020 | Flexure Method for Drop Cable Conditioning |
| SCTE 168-4 2019 (R2024) | End-to-End Multimedia Network Management Architecture Part 4: Recommended Practice for Transport Stream Verification Metrics |
| ANSI/SCTE 168-6 2017 (R2021) | Recommended Practice for Monitoring Multimedia Distribution Quality |
| ANSI/SCTE 168-7 2017 (R2021) | Recommended Practice for Transport Stream Verification in an IP Transport Network |
| ANSI/SCTE 170 2020 | Preparing an MDU Amplifier Extender Specification |
| ANSI/SCTE 171 2016 (R2022) | Passive Network Device (NID) Enclosure Specification |
| ANSI/SCTE 172 2024 | Constraints On AVC and HEVC Structured Video Coding for Digital Program Insertion |
| ANSI/SCTE 173-1 2017 (R2021) | Requirements for Preferential Telecommunications over IPCablecom Networks |
| ANSI/SCTE 173-2 2017 (R2021) | Framework for Implementing Preferential Telecommunications in IPCablecom and IPCablecom2 Networks |
| ANSI/SCTE 173-3 2017 (R2021) | Specification for Authentication in Preferential Telecommunications over IPCablecom2 Networks |
| ANSI/SCTE 173-4 2017 (R2021) | Specification for Priority in Preferential Telecommunications over IPCablecom2 Networks |
| ANSI/SCTE 174 2018 (R2024) | Radio Frequency over Glass Fiber-to-the-Home (RFoG) Specification Extension |
| ANSI/SCTE 175 2017 (R2021) | Recommended Practice for Qualifying Network Devices for High Availability Streaming Video |
| ANSI/SCTE 176 2019 | Specification for 75 ohm 'MCX' Connector, Male & Female Interface |
| SCTE 177 2018 (R2024) | Specification for Braided 75 Ω, Mini-Series Quad Shield Coaxial Cable for CMTS and SDI cables |
| SCTE 178 2019 (R2024) | Test Method for Cable Weld Integrity |
| SCTE 179 2020 | Recommended Practice Upgrading EAS to CAP Compliance |
| SCTE 183 2023 | SCTE Measurement Recommended Practices For Cable Systems |
| SCTE 184 2022 | SCTE Energy Management Operational Practices for Cable Facilities |
| ANSI/SCTE 185 2022 | Test Method for Cantilever Force, Female Port |
| ANSI/SCTE 186 2021 | Product Physical, Environmental, Electrical, Sustainability, and Quality Requirements for Cable Telecommunications |
| ANSI/SCTE 187-1 2019 (R2024) | Stereoscopic 3D Formatting and Coding for Cable |
| ANSI/SCTE 187-2 2019 (R2024) | Stereoscopic 3D PSI Signaling |
| ANSI/SCTE 187-3 2019 (R2024) | Informative Guidance for Stereoscopic Video |
| ANSI/SCTE 191 2018 (R2024) | Test Method for Axial Pull Force, Female "F" Port |
| ANSI/SCTE 193-1 2020 | MPEG AAC Audio Codec Constraints for Cable Television – Coding |
| ANSI/SCTE 193-2 2020 | MPEG-4 AAC Family Audio System – Part 2 Constraints for Carriage over MPEG-2 Transport |
| ANSI/SCTE 194-1 2024 | DTS-HD AUDIO SYSTEM – Part 1: Coding Constraints for Cable Television |
| ANSI/SCTE 194-2 2024 | DTS-HD AUDIO SYSTEM – Part 2: Constraints for Carriage over MPEG-2 Transport |
| ANSI/SCTE 197 2024 | Recommendations for Spot Check Loudness Measurements |
| ANSI/SCTE 200 2022 | Specification for a 75 ohm 'MMCX' Connector (MMCX-75), Male & Female Interface |
| ANSI/SCTE 201 2018 (R2024) | Open Media Security (OMS) Root Key Derivation Profiles and Test Vectors |
| SCTE 203 2024 | Product Environmental Requirements for Cable Telecommunications Facilities – Test Methods |
| SCTE 204 2020 | FCC Proof-of-Performance Checklist for Analog and Digital Signals |
| SCTE 205 2022 | Outside Plant Power Recommended Preventive Maintenance Procedure |
| SCTE 206 2021 | Cable Operator Business Continuity and Disaster Recovery Operational Practices |
| SCTE 207 2020 | Cable Operator Recycling Recommended Practices |
| SCTE 208 2021 | Cable Operator Greenhouse Gas Emissions Data Collection Recommended Practices |
| SCTE 209 2024 | Technical Report UHF Leakage, Ingress, Direct Pickup |
| ANSI/SCTE 210 2020 | Performance Metrics for Energy Efficiency & Functional Density of Cable Data Generation, Storage, Routing, and Transport Equipment |
| ANSI/SCTE 211 2020 | Energy Metrics for Cable Operator Access Networks |
| ANSI/SCTE 212 2020 | Cable Operator Energy Audit Framework and Establishment of Energy Baseline |
| ANSI/SCTE 213 2020 | Edge and Core Facilities Energy Metrics |
| ANSI/SCTE 214-1 2024 | MPEG DASH for IP-Based Cable Services Part 1: MPD Constraints and Extensions |
| ANSI/SCTE 214-2 2022 | MPEG DASH for IP-Based Cable Services Part 2: DASH/TS Profile |
| ANSI/SCTE 214-3 2015 | MPEG DASH for IP-Based Cable Services Part 3: DASH/FF Profile |
| ANSI/SCTE 214-4 2018 | MPEG DASH for IP-Based Cable Services Part 4: SCTE Common Intermediate Format (CIF/TS) |
| ANSI/SCTE 214-5 2024 | ISO BMFF Based DASH Constraints Part 5: DASH/ Constrained ISO BMFF Profile |
| ANSI/SCTE 215-1 2024 | HEVC Video Constraints for Cable Television Part 1- Coding |
| ANSI/SCTE 215-2 2024 | HEVC Video Constraints for Cable Television Part 2- Transport |
| ANSI/SCTE 216 2020 | Adaptive Power System Interface Specification (APSIS™) |
| ANSI/SCTE 217 2017 | MPEG DASH Reference Architecture for IP-based Cable Services |
| SCTE 218 2021 | Alternative Energy & Microgrids for Cable Broadband Providers: Use Cases, Value Proposition, Taxes, Incentives, and Policy Reference Document |
| SCTE 219 2021 | Technical Facility Climate Optimization Methodology |
| ANSI/SCTE 220-1 2022 | DOCSIS 3.1 Part 1: Physical Layer Specification |
| ANSI/SCTE 220-2 2022 | DOCSIS 3.1 Part 2: MAC and Upper Layer Protocols Interface |
| ANSI/SCTE 220-3 2022 | DOCSIS 3.1 Part 3: Cable Modem Operations Support System Interface-Specification |
| ANSI/SCTE 220-4 2022 | DOCSIS 3.1 Part 4: CCAP Operations Support System Interface Specification |
| ANSI/SCTE 220-5 2022 | DOCSIS 3.1 Part 5: Security Specification |
| SCTE 221 2020 | Field Strength & Calculation of LTE User Equipment Field Strength |
| SCTE 222 2020 | Useful Signal Leakage Formulas |
| ANSI/SCTE 223 2018 | Adaptive Transport Stream |
| ANSI/SCTE 224 2021 | Event Scheduling and Notification Interface (ESNI) |
| SCTE 225 2020 | Cable Operator Fleet Maintenance and Vehicle Selection Operational Practice |
| ANSI/SCTE 226 2015 | Cable Facility Classification Definitions and Requirements |
| SCTE 227 2022 | Cable Operator Location Risk Assessment Operational Practice |
| SCTE 229 2016 (R2022) | Operational Practice for Cable Facility Design Process |
| ANSI/SCTE 230 2021 | Recommended Practice for Proper Handling of Audio-Video Synchronization in Cable Systems |
| ANSI/SCTE 231 2019 | General Test Procedures for Evaluation of Energy Efficiency Metrics and in Support of Functional Density Metrics |
| ANSI/SCTE 232 2019 | Key Performance Metrics: Energy Efficiency & Functional Density of CMTS, CCAP, and Time Server Equipment |
| ANSI/SCTE 233 2016 (R2021) | Wavelength-Division Multiplex Small Form Factor Pluggable (PXFP-WDM) Optical Transmitter Module Interface Specification |
| SCTE 234 2016 (R2023) | Guidelines for Use of ISO 50001:2011 Energy Management Systems and Energy Metrics |
| SCTE 235 2017 | Operational Practice for the Coexistence of DOCSIS 3.1 Signals and MoCA Signals in the Home Environment |
| ANSI/SCTE 236 2021 | Content Metadata |
| ANSI/SCTE 237 2017 | Implementation Steps for Adaptive Power Systems Interface Specification (APSIS™) |
| SCTE 238 2017 | Operational Practice for Measuring and Baselining Power Consumption in Outside Plant Equipment and Power Supplies |
| SCTE 239 2017 (R2022) | United States Department of Homeland Security SHARES Overview – Operational Practice for Cable Sector Operators |
| ANSI_SCTE 240 2017 (R2022) | SCTE Test Procedures for Testing CWDM Systems in Cable Telecommunications Access Networks |
| ANSI/SCTE 241 2022 | Key Performance Metrics: Energy Efficiency & Functional Density of Wi-Fi Infrastructure Equipment |
| ANSI/SCTE 242-1 2022 | Next Generation Audio Coding Constraints for Cable Systems: Part 1 – Introduction and Common Constraints |
| ANSI/SCTE 242-2 2022 | Next Generation Audio Coding Constraints for Cable Systems: Part 2 – AC-4 Audio Coding Constraints |
| ANSI/SCTE 242-3 2022 | Next Generation Audio Coding Constraints for Cable Systems: Part 3 – MPEG-H Audio Coding Constraints |
| ANSI/SCTE 242-4 2022 | Next Generation Audio Coding Constraints for Cable Systems: Part 4 – DTS-UHD Audio Coding Constraints |
| ANSI/SCTE 243-1 2022 | Next Generation Audio Carriage Constraints for Cable Systems: Part 1 – Common Transport Signaling |
| ANSI/SCTE 243-2 2022 | Next Generation Audio Carriage Constraints For Cable Systems: Part 2 – AC-4 Audio Carriage Constraints |
| ANSI/SCTE 243-3 2022 | Next Generation Audio Carriage Constraints for Cable Systems: Part 3 –MPEG-H Audio Carriage Constraints |
| ANSI/SCTE 243-4 2022 | Next Generation Audio Carriage Constraints for Cable Systems: Part 4 – DTS-UHD Audio Carriage Constraints |
| SCTE 244 2018 (R2024) | Specification for Braided 75 Ω, Micro-Series Quad Shield Coaxial Cable for Connectivity and Dense CCAP/Edge QAM Applications |
| SCTE 245 2023 | Use Cases for Adaptive Power Using APSIS™ |
| SCTE 246 2018 | Best Practices in Photovoltaic System Operations and Maintenance for Cable System Operator |
| SCTE 247 2018 (R2024) | High Dynamic Range (HDR) Video: System Requirements for Cable Phase 1 – Initial Deployment |
| SCTE 248 2018 | Operational Practice on Multiple Audio Signaling |
| ANSI/SCTE 249 2018 | Test Method Common Mode Disturbance |
| ANSI/SCTE 250 2022 | Real-time Event Signaling and Management API |
| SCTE 251 2018 (R2024) | Test Procedure for Determining the Thermal Oxidative Stability of Foamed Polyethylene |
| ANSI/SCTE 252 2018 | Attenuation of Common Mode Filters |
| SCTE 253 2019 | Cable Technical Facility Climate Optimization, Operational Practice: Understanding Set Point Values, Part 1 |
| ANSI/SCTE 254 2019 (R2024) | Content Encoding Profiles 3.0 Specification (Closed Specification) |
| SCTE 255 2019 | Operational Practice for Home Wi-Fi Deployment |
| SCTE 256 2024 | IoT Security Considerations and Recommendations for Operators |
| SCTE 257 2024 | Techniques for Accurate Measurement of Cable TV Network Downstream RF Signal Levels |
| SCTE 258 2020 | DOCSIS 3.1 Downstream OFDM Power Definition, Calculation, and Measurement Techniques |
| ANSI/SCTE 259-01 2020 | Enterprise SIP Gateway Specification |
| ANSI/SCTE 259-02 2020 | PacketCable High Definition Voice Specification |
| ANSI/SCTE 259-03 2020 | HDV NCS Specification |
| ANSI/SCTE 259-04 2020 | HDV Provisioning Specification |
| ANSI/SCTE 259-05 2020 | HDV SIP Specification |
| ANSI/SCTE 260-1 2020 | DPoE Architecture Specification |
| ANSI/SCTE 260-2 2020 | DPoE IP Network Element Requirements |
| ANSI/SCTE 260-3 2020 | DPoE Metro Ethernet Forum Specification |
| ANSI/SCTE 260-4 2020 | DPoE MAC and Upper Layer Protocols Interface Specification |
| ANSI/SCTE 260-5 2020 | DPoE OAM Extensions Specification |
| ANSI/SCTE 260-6 2020 | DPoE Operations and Support System Interface Specification |
| ANSI/SCTE 260-7 2020 | DPoE Physical Layer Specification |
| ANSI/SCTE 260-8 2020 | DPoE Security and Certification Specification |
| ANSI/SCTE 262-1 2020 | DOCSIS 4.0 Part 1: Physical Layer Specification |
| ANSI/SCTE 262-2 2020 | DOCSIS 4.0 Part 2: MAC and Upper Layer Protocols Interface Specification |
| ANSI/SCTE 262-3 2020 | DOCSIS 4.0 Part 3: Cable Modem Operations Support System Interface Specification |
| ANSI/SCTE 262-4 2020 | DOCSIS 4.0 Part 4: CCAP™ Operations Support System Interface Specification |
| ANSI/SCTE 262-5 2020 | DOCSIS 4.0 Part 5: Security Specification |
| SCTE 263 2020 | XML Schema Management Operational Practice |
| ANSI/SCTE 264 2021 | Broadband Radio Frequency Hardline Taps for Cable Systems |
| ANSI/SCTE 265 2021 | Broadband Radio Frequency Hardline Passives for Cable Systems |
| SCTE 266 2021 | IoT Recommended Premises Network Infrastructure Practices for Cable Operators |
| ANSI/SCTE 267 2021 | Optimum Load Shaping for Electric Vehicle and Battery Charging |
| SCTE 268 2021 | Operational Practice on the Usage of SCTE 224 for Advertising Information |
| ANSI/SCTE 269 2021 | Test Procedure for “F” Port Center Conductor Retention Force |
| SCTE 270 2021r1 | Mathematics of Cable |
| ANSI/SCTE 271 2021 | Requirements for Power Sensing in Cable and Utility Networks |
| ANSI/SCTE 272 2021 | Standardized Loading for Reverse-Path Bit Error Ratio Testing |
| ANSI/SCTE 273-1 2021 | Generic Access Platform (GAP) Enclosure Specification |
| ANSI/SCTE 273-2 2021 | Generic Access Platform (GAP) Modules Specification |
| SCTE 273-3 2021 | Generic Access Platform Systems Integrator Best Practices |
| SCTE 274 2021 | Cable Operator Critical Facility Air Containment Operational Practice |
| ANSI/SCTE 275 2021 | Electrical Grounding and Bonding for Cable Broadband Network Critical Facilities |
| SCTE 276 2022 | Video Metadata Extraction in Digital Advertising |
| SCTE 277 2024 | Linear Contribution Encoding Specification |
| ANSI/SCTE 278 2022 | Standard Data Fields for Outside Plant Power |
| ANSI/SCTE 279 2022 | 1.8 GHz Broadband Radio Frequency Hardline Amplifiers for Cable Systems |
| SCTE 280 2022 | Understanding and Troubleshooting Cable RF Spectrum |
| ANSI/SCTE 281-1 2023 | VVC Video Constraints for Cable Television Part 1- Coding |
| ANSI/SCTE 281-2 2023 | VVC Video Constraints for Cable Television Part 2- Transport |
| ANSI/SCTE 282 2023 | Implementing Inside Plant Network Platform Hot Standby Powering |
| ANSI/SCTE 283 2023 | Information Model for Smart Broadband Amplifiers |
| SCTE 284 2023 | Cable Operator’s Aging in Place and Telehealth Opportunity Analysis |
| SCTE 285 2023 | DOCSIS 3.1 RxMER PNM Test Validation |
| SCTE 286 2023r1 | Operational Practices for Gaining Access to Incident Areas |
| SCTE 287 2023 | Right-Sizing Outside Plant Power Supplies |
| SCTE 289 2024r1 | Operational Practice for Building and Using Calibrated Leaks |
| SCTE 290 2024r1 | Service and Network Reliability Measurements and Use Cases |
| SCTE 291 2024r1 | Broadband Provider Business Impact Analysis Process |
| ANSI/SCTE 292 2024r1 | Broadband Component QR Code Technical Requirements |
| SCTE 293-1 2024 | What is … the Decibel? |
| SCTE 293-2 2024 | What is … Velocity of Propagation? |
| SCTE 293-3 2024 | What is…Return Loss? |
| SCTE 294 2024r1 | Understanding and Troubleshooting Cable Upstream RF Spectrum |
| SCTE 300 2024 | Best Practices for Migrating to DOCSIS 4.0 |